Kompernass KH 2391 - Manual (Page 7)

9 GB/IE
· When installing in a motor vehicle please ensure
that the vehicle cannot be operated and has
been securely immobilised!
Turn off the ignition and park the vehicle with
the handbrake applied.
· Complete the connection to the 12 V DC power
supply with full protection against moisture!
· Ensure that the 12 V DC power supply is discon-
nected when carrying out installation, mainte-
nance and servicing!
· Do not place the device in the vicinity of mois-
ture, fire, heat and prolonged temperatures
above 0° C!
· Do not damage any lines required for fuel,
electricity, brakes, hydraulics, water or data
transmission when attaching the screws!
· Ensure that the plug-in for 12 V DC constant
current fn , the plug-in for 12 V DC ignition cur-
rent fp and - if applicable - the plug-in electric
aerial fo do not come into contact with a fuel
line (e.g. petrol pump)!
· Do not allow yourself to become distracted
from the road traffic when operating or reading
the displays of the car radio! Acquaint yourself
with operation of the radio before starting your
journey and practise how to use the radio‘s
features safely! You should also adjust the
volume in such a way that you can hear the
sirens of emergency vehicles.
m Caution!
· Ensure that you do not injure or damage the
sensitive hearing of your passengers (particularly
infants, children and pets) in the vehicle! Adjust
the volume and balance of the loudspeakers to
a safe and comfortable level for all passengers!
Note: Adjust the volume such that you can
always hear the warning signals of other road
users.
· Before operating the radio, check that all com-
ponents have been installed in accordance with
the instructions!
· Before assembling and operating the radio,
check that the supplied parts are complete and
not damaged!
· Use the car radio only with the original supplied
parts!
· Do not cover the metal housing du with other
objects!
· Protect all electrical contact surfaces against
short circuits, moisture, damage and dirt!
· Do not place the device on or next to the battery
of a motor vehicle!
· Prevent short circuits and damage! Please
ensure that no foreign bodies or objects get
inside the radio!
· In case of malfunctions or damage please
disconnect the car radio immediately from the
12 V DC power supply!
· Connect to the loudspeakers, CD changer,
amplifier and audio storage media (CD, CD-R,
CD-RW, USB memory stick, MP3 player, SD and
MMC) in accordance with the respective
operating instructions!
· The car radio should only be repaired by au-
thorised and trained specialists! If your radio
needs repairing, please contact the service
centre for your country (see guarantee card)!
· Do not subject the device to any mechanical
loads!
· Prevent theft and unauthorised use in particular
when the device is installed in a motor vehicle!
Before leaving a parked vehicle remove the
control panel from the car radio and store it in
the plastic box to protect it.
· Damaged fuses should only be replaced by
new fuses of the same type and with the same
ampere value!
· If you are not going to use the remote control for
a prolonged period, please take out the battery!
Tip! What course of action you should follow!
· Take your time when familiarising yourself with
operation of the car radio! Ensure a tidy and
undisturbed environment for the work required
and carry it out with maximum concentration.
· Plan the installation location with care.
Ensure that when the car radio is installed it
does not cause any obstacles to the driver.
· The very sensitive CD-R, CD-RW discs should
be used in accordance with their instructions!
· Ensure that audio storage media can be played
back unhindered! Clean CDs, CD-Rs and CD-RWs
before use with a dry, antistatic cloth, beginning
Safety
KH2391_Content_UK.indd 9 05.09.2006 14:49:10 Uhr