Kompernass Bifinett KH1166 - Manual (Page 23)

- 21 -
The symbol for the child protection
system
appears on the LED display,
and the appliance cannot be put into
operation for as long as this function
is active.
Setting the child protection system
Hold the button e „Cancel/Stop/
Childlock“ down for ca. 3 seconds. At
first an acoustic signal sounds, then the
symbol for child protection system
appears in the LED display.
Deactivating the child protection system
Hold the button e „Cancel/Stop/
Childlock“ down again for ca. 3 seconds,
until an acoustic signal sounds and the
symbol child protection system
disappears.
Power-save function
You can activate the power-save function
if you do not wish to use the microwave.
Activating the power-save function
Press (in Standby Operation) the button
i „Pre-setting“ for one second.
The LED display goes out and the power-
save function is activated.
Deactivating the power-save function
As soon as you press any button, the
microwave switches into standby mode.
The clock is displayed.
Note: Despite the Power-Save func-
tion the clock continues to run in
the background.
Acoustic signal function
When a cooking process is completed,
five short acoustic signals are sounded
and "End" and "Hot" appear alternatively
in the display. If the door is not opened
after ca. 2 minutes, 4 short acoustic
signals sound again.
Note:
• If you have pressed a button and
activated a valid function, an acoustic
signal sounds. If you have selected an
invalid button/function, 2 acoustic
signals will sound.
• If, after programming the cooking
process, you have not pressed the
button r „Start/Quickstart“ within
15 seconds, the appliance returns to
standby operation (the time is
displayed) and an acoustic signal
sounds.
KH 1166
IB_long_KH1166_E5166_EN.qxd 19.06.2007 14:14 Uhr Seite 21