Kenwood VR-5090 - Manual (Page 6)

iv
I can’t hear sound from one or more of the speakers, or the
sound is abnormally low .................................................. 72
I can’t hear sound from my surround or center speakers ... 72
I can hear sound only from the center speaker when Dolby
Pro Logic is selected .......................................................... 72
A DTS-ES encoded source is played but it is not decoded in
DTS-ES. ............................................................................... 72
A Dolby Digital Surround EX-encoded source is played with
THX Surround EX set to “Auto”, but the source is not
reproduced in 6.1-channel audio. .................................... 73
Sound from one (or more) of my components is abnormally
loud or soft ........................................................................ 73
I can’t hear sound from some of my laser discs .................. 73
There wasn’t any sound recorded on tapes made on my VCR
or tape deck ........................................................................ 73
The initial sound is intermittent or non-existent when I start
to play from a Dolby Digital, DTS, DTS-ES or MPEG
source ................................................................................. 73
With a Dolby Digital program or DTS program, the loud
sounds aren’t very loud and the quiet sounds aren’t very
quiet .................................................................................... 74
All I hear is loud static when I play DTS discs ..................... 74
I hear a hum when I select the PHONO input .................... 74
Sound is intermittent ............................................................. 74
I can’t hear any sound in Zone B .......................................... 74
Video ....................................................................................... 74
I can’t see the program I’m playing on the TV. There wasn’t
any video output to my VCR when I recorded ................ 74