Kenwood KRF-X9080D - Manual (Page 28)

28 EN
ENGLISH
Presetting radio stations manually
The RDS auto memory function assigns preset numbers to RDS stations
starting from preset number “1”. Therefore, be sure to execute the RDS
auto memory function before using the following operations to manually
store AM stations and other FM stations, and RDS stations. See
“Presetting RDS stations (RDS AUTO MEMORY)”.
ª
MULTI CONTROL
MEMORY TUNER
1
Tune to the station you want to store.
2
Press the MEMORY key while receiving the station.
Blinks for 20 seconds Lights for 20 seconds
L
SL S SB SR
C R
LFE
SP MUTE OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC
STEREO
LOUDNESS
NEO:6
CSII A B CLIP
AUTO DETECT THX
AUTO
RDS
RTY
STEREO
TUNED
Surround EX
MEMORY
Proceed to step 3 within 20 seconds.
(If more than 20 seconds elapse, press the MEMORY key again).
3
Use the MULTI CONTROL knob or Multi ( % / fi ) keys to select
one of the station presets (1 – 40).
4
Press the MEMORY key again to confirm the setting.
• Repeat steps 1, 2, 3 and 4 to store as many stations as
necessary.
• If you store a station at a previously used preset, the old station will
be replaced by the new one.
Receiving preset stations
1
Press the TUNER key to select tuner as the source.
Listening to radio broadcasts
2
Enter the number of the preset station you want to receive
(up to “40”).
Press the numeric keys in the following order:
For “15”, press 0, 5
For “20”, press 0, 0, )
• If you make a mistake entering a two digit number, press the +10
key repeatedly to return to the original display and start again.
L
SL S SB SR
C R
LFE
SP MUTE OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC
STEREO
LOUDNESS
NEO:6
CSII A B CLIP
AUTO DETECT THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
Receiving preset stations in order (P.CALL)
1
Press the TUNER key to select the tuner as the source.
2
Use the P.Call @ / # keys to select the desired station.
• Each time you press the key, another preset station is received in
order.
Pressing the P.Call # does the following:
Pressing the P.Call @ does the following:
Holding down the # or @ key, lets you skip through the presets,
receiving each preset station at 0.5 second intervals.
TUNER
Numeric keys
(P.Call @/#)
TUNER
04.6.16, 3:54 PM 28