Kenwood KRF-X9080D - Manual (Page 6)

6 EN
ENGLISH
L
SL S SB SR
C R
SP MUTE OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs DSP MODE
DTS
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC
STEREO
LOUDNESS
NEO:6
CLIP
AUTO DETECT
AUTO
RDS
PTY
MEMORY
STEREO
TUNED
SW
LFE
SPEAKER EQ ACTIVE EQ DSP STEREO INPUT MODE DIMMER
SOUND TONE SETUP
BAND AUTO MEMORY
MULTI CONTROL LISTEN MODE TUNER
MD/TAPE VIDEO 3 VIDEO 2 VIDEO 1
PHONO CD/DVD
THX
DTS
DSP
DOLBY DIGITAL
SPEAKER EQ
ACTIVE EQ
STANDBY
ON/STANDBY
A SPEAKERS B
POWER
PHONES
DOWN
MUTE
AV AUX
S VIDEO VIDEO L-AUDIO-R
UP
VOLUME CONTROL
DVD/6CH
-ON –OFF
THX
A B
THX
Surround EX
Names and functions of parts
Main unit
1 POWER ON/OFF key (
Use to turn the main power on or off.
2 ON/STANDBY key (
Use to turn the power ON/STANDBY when
the POWER is turned on.
STANDBY indicator
3 SPEAKERS keys £
Use to turn the A/B speakers on or off.
4 THX key ›
Use to switch the status of THX.
5 SPEAKER EQ key ¢
Use to select SPEAKER EQ’s setting.
6 Surround LED (light-emitting diode)
indicators
THX indicator
fi
Lights when the THX mode has been chosen.
THX mode may or may not be activated
depending upon the applicable playback
mode.
SPEAKER EQ indicator
∞
Lights when the receiver is in the SPEAKER
EQ mode.
ACTIVE EQ indicator
¢
Lights when the receiver is in the ACTIVE EQ
mode.
DOLBY DIGITAL indicator
›
Lights when the receiver is in the Dolby
Digital mode.
DTS indicator ›
Lights when the receiver is in the DTS mode.
DSP indicator
›
Lights when the receiver is in the DSP mode.
7 ACTIVE EQ key ¢
Use to select ACTIVE EQ’s setting.
8 DSP key ›
Use to select any of the DSP mode.
9 STEREO key ›
Use to switch the listen mode to STEREO.
0 INPUT MODE key 8
Use to switch between the full auto, digital
and analog inputs.
! DIMMER key
Use to select the REC MODE. §
Use to adjust the brightness of the display.
fl
@ VOLUME CONTROL knob £
# MUTE key ¢
Use to temporarily mute the sound.
$ PHONES jack ∞
Use for headphone listening.
% Input Selector keys £
DVD/6CH, CD/DVD, PHONO , TUNER,
VIDEO 1, VIDEO 2, VIDEO 3, MD/TAPE
Use to select input sources.
Standby mode
While the standby indicator is lit, a small amount of power is supplied to
the system to back up the memory. This is called standby mode. Under the
condition, the system can be turned ON by remote control unit.
^ SOUND key fl
Use to adjust the sound quality and the
ambience effects.
& BAND key ¶
Use to select the broadcast band.
* AUTO key ¶
Use to select the auto or manual tuning
mode.
( TONE key ¢
Use to switch the status of TONE control.
) MEMORY key •
Use to store radio stations in the preset
memory and to start the Auto Memory.
¡ SETUP key (
Use to select the speakers' settings etc.
™ keys (
Use for selection adjustments during sound,
setup and preset channel functions.
£ MULTI CONTROL knob (
Use to control a variety of settings.
¢ LISTEN MODE knob ›
Use to select the listening mode.
∞ AV AUX (S VIDEO, VIDEO, L-AUDIO-R)
jacks *
§ AV AUX key *
Use to switch the input to AV AUX.
Display
* Input channel indicators
Output channel indicators
AUTO indicator
MEMORY indicator
STEREO indicator
TUNED indicator
Frequency display
Input display
Preset channel display
Surround mode display
Speaker
indicators
RDS indicators
MUTE
indicator CLIP
indicator Input mode
indicators Listen mode
indicators
CAUTION
The power in this equipment will not be completely cut off from the
AC wall outlet when the main switch is turned OFF.
* Input channel indicators
The Input channel indicators
lights up to indicate the chan-
nels contained in the input
signal. The "
S" indicator lights
when the surround compo-
nent consists of a single chan-
nel.
04.6.16, 3:49 PM 6