Viewing images on a windows pc – Kyocera SL300R User Manual
Page 37
2-13
2
Basic Operations
• If you are using Windows 98 or Windows 98SE, install the USB drivers before connecting
the USB cable. ( p.2-12)
• If you are using Windows Me, Windows 2000 or Windows XP, no driver installation is
needed. Connect the USB cable without installing the drivers.
• To view images on your PC, you must have image-viewing software already installed. (To
play movies, QuickTime 4.1 or later must be installed.)
• You cannot check images on your PC unless there is a memory card in the camera.
Viewing images on a Windows PC
1
Load the memory card into the
camera. ( p.1-3)
2
Connect the AC adapter to the
camera.
3
Connect the camera to your PC
using the dedicated USB cable and
then start up the PC.
• Check the size of the USB connectors. The small
connector plugs into the camera and the large
connector plugs into the USB port on your PC.
Finecam_E.book Page 13 Thursday, August 28, 2003 6:21 PM