Metering, Selecting the area used for setting the exposure – Kyocera SL300R User Manual
Page 81
4-23
4
Using
C
Camera
Mode,
N
Continuous Shooting Mode and
M
Mo
vie Mode
• Because this setting is retained even when the camera is switched off, you need to restore
the original setting or otherwise modify the setting to suit the scene or subject being shot.
Applicable mode: C/N
This setting allows you to select the area that the camera uses when setting the exposure.
The available settings are [EVALUATION], [CENTER] and [SPOT AREA]. Use the setting
that best suits your subject.
5
Press
U
or
D
on the 4-way button to select
the desired ISO setting and then press the
OK button
E
.
[No icon] AUTO: The camera sets the ISO sensitivity to suit
the ambient conditions. (default)
[ISO100] 100:
Fixed at ISO 100
[ISO200] 200:
Fixed at ISO 200
[ISO400] 400:
Fixed at ISO 400
[ISO800] 800:
Fixed at ISO 800
6
Press the MENU button K to clear the menu.
7
The selected setting ([ISO200], etc.) appears
on the LCD monitor.
[METERING]
Selecting the Area Used for Setting the Exposure
1
Switch the camera on and press
O
or
Q
on the mode
button until the “
C
” or “
N
” icon lights on the mode select
LED.
2
Press the MENU button K to display the menu icons.
3
Use
L
or
R
on the 4-way button to select
SET DETAILS [
] and then press the OK
button
E
.
METERING
DIGITAL ZOOM
200
400
800
FOCUSING
AUTO
SETTINGS(2/2)
LONG EXP.
100
ISO
SET DETAILS
Finecam_E.book Page 23 Thursday, August 28, 2003 6:21 PM