Kodak MP6000 - Manual (Page 12)

ADVANCED PLAYBACK
10
Title Digest
Select Digest Type:
Title Interval
Chapter Digest
Chapter Interval
INTRO
Press this button the screen display
Select an item, press ENTER/PLAY and some
thumbnail items will display. Move the cursor or input
digits directly to select chapter you want, then press
ENTER/PLAY. The disc will playback from where you
select.
V.MODE
IMPORTANT NOTE:
THE FOLLOWING FUNCTION DESCRIPTIONS ARE FOR DVDS, OPERATION AND DISPLAY ON SCREEN
MAY BE DIFFERENT FOR OTHER FORMAT DISCS.
OSD (On Screen Display)
Pressing this button will cycle among "title elapsed",
"title remain", "chapter elapsed", "chapter remain"
and "display off ".
SEARCH
Press this button one time, the screen will display
search menu, the second will cancel. In search menu,
you can use UP/DOWN cursor button to select item
what you wanted, Then press ENTER/PLAY button
to confirm.
REPEAT
Press REPEAT and Chapter repeat will be
displayed on screen, the second press will display
Title repeat, the third press will display All repeat,
the fourth press will cancel repeating.
A-B REPEAT
Press A-B RPT to begin start-point, press again
to set an end point and complete setting. The
selected section A-B will be repeated. The third
press will cancel this function.
ZOOM
Press this button to enlarge or reduce the picture size.
Each time the button is pressed, the magnification
level will change.
ANGLE
For discs with this feature, press this key to view
action from different angles.
SUBTITLE
Press this button and the screen will display "SUBTI-
TLE 01/XX XXXXX", "01" indicates the ordinal
number of this language; "XX" indicates total number
of languages; "XXXXXX" indicates the language of
country. (the number of languages depends on disc).
DSP
Press this button, the Audio output will set to
simulate various kinds of music effect like "ROCK ",
"POP", " LIVE ", " DANCE "," TECHNO ","CLASSIC"
" SOFT ", " OFF".
PROGRAM
When playing discs, press this button to enter
program mode. Press digits to input the program
number that you want, and when finished, move the
cursor to select the " START " to start program
playback. If you want to cancel this function, press
" STOP " , then press "ENTER/PLAY". This allows
you to select and play only those chapters you want.
PROGRAM
This button can set VIDEO output to "CVBS", "YUV"
interlaced or "YUV" progressive scan.
CLEAR
This button can cancel incorrect information you input.
AUDIO
Press this button on remote control to change the
mode of audio.
For example: Audio 1/2: MPEG 2 CH English
Audio 2/2: AC 3 5.1 CH English