Kodak MP6000 - Manual (Page 17)

SYSTEM SETUP
15
DYNAMIC: this function is generally used when
playing high volume programs at night, in order
not to disturb the neighbour. This setting can dyna-
mically lower the volume and still keep the original
tone quality. This is the range, measured in deci-
bels(dB), between the loudest and the quietest
sound registers in a soundtrack.
4. VIDEO SETUP PAGE
3. DOLBY DIGITAL SETUP PAGE
COMPONENT: Sets the video output.
DUAL MONO: If your amplifier / decoder has
Dolby Digital output, you may select stereo, left
mono, right mono, or mixed mono mode for your
amplifier decoder.
3.1 DUAL MONO
3.2 DYNAMIC
4.1 COMPONENT
TV MODE: Set the scan mode to the same as your
TV.
NOTE: Progressive Scan avaliable in YUV mode only.
4.2 TV MODE SETUP
Dolby Digital Setup
Dual Mono
Dynamic Stereo
L-Mono
R-Mono
Mix-Mono
Dual Mono (1 + 1) Setup
Dolby
Dolby Digital Setup
Dual Mono
Dynamic
Set DRC To Full
FULL
3/4
1/2
OFF
1/4
Dolby
Video Setup Page
Video Setup Page
Component
TV Mode
Sharpness
Brightness
Contrast
Component
TV Mode
Sharpness
Brightness
Contrast
CVBS
Low
00
00
YUV
Low
00
00
CVBS
YUV
Interlace
P-SCAN
Component
Set P-SCAN On/Off
Dolby
Dolby
Please choose the sampling frequences of digital
filter, the higher the sampling frequences are, the
clearer the audio quality is. When default setting is
Off, it will display "CD" when reading HDCD. For
HDCD playback, please choose 44.1K or 88.2K.
SHARPNESS: Sets the sharpness level of video
output.
4.3 SHARPNESS
Video Setup Page
Component
TV Mode
Sharpness
Brightness
Contrast CVBS
Low
00
00 High
Medium
Low
Sharpness
Dolby