Specifications – Kingston Technology KNE8TX/RS User Manual
Page 25
Appendix C Specifications
19
KNE24TX/RS User’s Guide - Rev. A01
Kingston Technology Company
100FX Modules:
with SC connectors
with ST connectors
Part Numbers:
KNE100FX/RSC
KNE100FX/RST
Specifications
Fast EtheRx Model: KNE24TX/RS
Compliance:
IEEE 802.3u 100BASE-TX Standard for 100Mb/s
baseband networks
Media Interface:
24 UTP ports for 100BASE-TX connections
Diagnostic LEDs:
24 LEDs for Link (Green), Activity (flashing Green),
and
Partition (flashing Amber)
1 LED for Collision status (Amber)
1 LED for Power Indicator (Green)
5 LEDs for Utilization Status (steady green)
1 LED for Fiber Module Detection (steady green)
Uplink Port:
Port 24 supports crossover and straight-thru cable
Connector Type:
RJ-45, Female
Cable Type:
UTP 26 to 22 AWG
Cable Grade:
Category 5 or better
Stacking Cable:
50-pin shielded cable
Additional stacking:
Up to 6 hubs maximum
Max. segment length:
100m (328 ft)
Inter-repeater link:
No. of repeaters:
Cable Length:
Two (2) Class II repeaters maximum
5 meters (16.4 feet)
Environmental:
Operating Temp.
0°C to 45°C (32°F to 113°F)
Storage Temp.
-20°C to 60°C (-4°F to 140°F)
Relative Humidity
10% to 90% non-condensing
Electrical:
Input Voltage:
100VAC - 240VAC, 50/60Hz
Auto-sensing, internal power supply
Output Voltage:
5VDC / 8A
Power Consumption:
27W maximum
Physical:
Dimension
(H x L x D):
1.70” x 17.32” x 10”
(43.2mm x 440mm x 254mm)
Weight:
9.25 lbs. (4.2 kg)
Certification:
EMI Standards:
FCC Class A, CE CISPR A, C-Tick
EMC Standards:
EN55022, IEC801-2, IEC801-3, IEC801-4
Low Volt Directive:
EN60950
Safety Standards:
UL, cUL, TUV
Optional Accessories: