System connections, Caution, Malfunction of microcomputer – Kenwood CD-206 User Manual

Page 4

Advertising
background image

CD-206/204/203/DPF-R6010/R4010/R3010 (En)

4

L

R

CD

SYSTEM

CONTROL

AC110-220V AC220-240V

L

R

VARI ABLE

LINE OUTPUT

@

DIGITAL OUTPUT

SYSTEM CONTROL

OPTICAL

COAXIAL

SL16

XS 8

ƒ

TEXT

OPTICAL

COAXIAL

L

R

SL16 XS 8

ƒ

AC 110-120V

2 3 AC 220-240V

SYSTEM

CONTROL

LINE OUTPUT

DIGITAL

INPUT

System connections

Caution:

Do not plug in the power lead until all connections are
completed.

If operation is not possible or erroneous display appears even though
all connections have been made properly, reset themicrocomputer
referring to “In case of difficulty”.

Make connections as shown below.
When connecting the related system components, refer also
to the instruction manuals of the related components.

1. Connect all cords firmly. If connections are loose there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging connection

cords without removal of the power cord can cause malfunctions or damage to the unit.

Notes

Notes

Connection to digital amplifier or MD (CD-206/DPF-R6010 only)

Optical fiber cable

÷ When using an optical fiber cable to connect this unit to a digital

amplifier, insert the plug straight into the jack until a snap sound is
heard.

÷ Be careful not to bend, coil, or bundle the optical fiber cable.

÷ Optical fiber cables available on the market may not always be able to

be used with this player. If your cord cannot be used with this unit,
consult the store from which you purchased the cord or your nearest
dealer.

Connect the DIGITAL OUTPUT (OPTICAL or COAXIAL) jack to the digital input jack of the amplifier, DAT recorder, MD recorder,
etc., using an optical fiber cable or coaxial cable which are commercially available in audio stores.

Malfunction of microcomputer

75

coaxial cable

with RCA PIN.
(Commercially-
available)

Remove the protection cap when using the
DIGITAL OUTPUT (OPTICAL) jack

SL 16/XS8 switch

5

(OPTICAL)

DIGITAL INPUT

(COAXIAL)

Digital component (MD, DAT, etc.)

System control cord

Commercially-available
optical fiber cable

Digital amplifier
(or ordinary amplifier, receiver, etc.)

Audio cord

To wall AC outlet

To wall AC outlet

SL 16/XS8 switch

5

CD-206/DPF-R6010 :

CD-204/203/
DPF-R4010/R3010 :

Advertising