Kenwood CD-206 - Manual (Page 9)

9
CD-206/204/203/DPF-R6010/R4010/R3010 (En)
REMOTE CONTROL UNIT
RC-P0601
I D C S R A E I D G N
1 D : C D E T T X
«
1
Preparing to Play Tracks
Load/unload a disc.
Close the tray.
ALL TEXT SEARCH (CD-206/DPF-R6010 only)
For most CD-TEXT discs, it is convenient to read the complete disc information into the CD player before playing the disc.
This allows text information such as TITLE SEARCH, TEXT DISPLAY, ALL INFO., and other messages to be displayed faster.
: Keys and controls used in the operations described on this page.
All DISC indicators " " light regardless of how many discs are present.
Label side
Disc tray
2 Place/remove a disc.
3
When loading or unloading other discs
Search in progress or reading information
Blinks.
When the disc is CD-TEXT
÷ Repeat the above procedure so that the complete disc information is
read into the CD player.
÷ In the case of a non-CD-TEXT disc, the ”D1 : NO CD TEXT“ display will
appear for approx. 3 seconds.
÷ The information read into the CD player is cleared when
the tray is opened. Therefore, perform this operation
again if the tray was opened.
After loading all the discs, operate in stop mode.
Preparation
• Turn the unit ON.
Remote control unit only
÷ Do not touch the played side of disc.
÷ Loading two discs together will cause malfunctioning.
÷ Place the disc properly along the groove on the tray. (If the disc is not
placed horizontally, malfunction will result.)
÷ A single CD (8 cm disc) can also be played.
÷ Ordinary CD single (8 cm) disc adapters sold in audio stores cannot be
used with this unit.
÷ When loading/unloading a disc while the tray rotates, a malfunction
might occur. Load/unload the disc when the tray does not rotate.
-ON –STANDBY
POWER
Press the ON/STANDBY (POWER / )key.
0
DISC SKIP
CD-206/DPF-R6010
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5
1
Open the tray.
2
CD-204/203/DPF-R4010/R3010
0
REMOTE CONTROL UNIT RC-P0601
ALL TEXT
SEARCH
Hereafter the illustration of the common parts
on the front panel is of CD-206/DPF-R6010.
All DISC indicators " " light regardless of how many discs are present.
10 9 8 7 6
5 4 3 2 1
5 4 3 2 1
TRACK NO.
0 1 0 0 0 : 1
SINGLE
TOTAL DISC
NO.
Loading/unloading discs