Kenwood HM-331 - Manual (Page 33)

Application section
HM-331 (En/T)
33
Convenient Recording Methods
Selection of the Recording Type
This unit provides the following recording fea-
tures in addition to normal recording. Select the
appropriate method according to the purpose of
recording.
\
\
\
To record CD with a simplified method
One-touch recording (CD
=
TAPE) ›
One-touch recording (all-track recording)
One-touch recording (single-track recording)
Program recording
To record desired CD tracks by reordering them
Program recording (CD
=
TAPE) fi
One-touch recording of an entire CD onto a tape.
One-touch recording of the CD track being
played onto a tape.
(This is convenient for recording of desired
tracks from a disc being heard for the first time.)
Recording of programmed tracks in the pro-
grammed order.
(Convenient for recording only the desired CD
tracks in the desired order.)
Program recording can be used in combination
with the ”One-touch recording” .
With recording onto tape, the track will be interrupted for the part of the guide tape at the tape reversal, where
recording is not possible. Please use single-side recording if this is to be avoided.
Note Note Note
Note that this cassette deck cannot record onto
Metal tapes.
Note Note