Remote control unit – Kenwood HM-331 User Manual

Page 45

Advertising
background image

HM-331 (En/T)

45

Knowledge section

Remedy

Cause

Symptom

CD player section

÷ Place the disc properly, with the label

side facing upward.

÷ Place the disc properly.

÷ Clean the disc referring to “Disc han-

dling precautions”.

÷ Try another disc.

÷ Refer to “Caution on condensation” and

remove the condensation by evaporation.

÷ Place a disc in the CD player.

÷ Press the 6 key.

÷ Clean the disc referring to “Disc han-

dling precautions”.

÷ Try another disc.

÷ Clean the disc referring to “Disc han-

dling precautions”.

÷ Try another disc.

÷ Install the unit in a place not subject to

vibrations.

A CD is placed in the player but
it cannot be played.

Sound is not produced.

Sound skips.

÷ The disc is placed upside down.

÷ The disc position is displaced.

÷ The disc is extremely dirty.

÷ The disc is scratched.

÷ Dew is condensed on the optics lens.

÷ The disc has not been placed.

÷ The player is not put to the play mode.

÷ The disc is extremely dirty.

÷ The disc is scratched.

÷ The disc is dirty.

÷ The disc is scratched.

÷ The player is subject to vibration.

5

e

5

5

Remote control unit

Symptom

Cause

Remedy

Remote control operation is
not possible.

÷ Batteries are exhausted.

÷ The remote control is too far away from

the system, the controlling angle is devi-
ated or there is an obstacle in between.

÷ The component to be played is not loaded

with a CD or cassette tape.

÷ Replace with new batteries.

÷ Operate the unit inside the remote con-

trollable range.

÷ Load a CD or cassette tape in the com-

ponent to be played.

#

#

In case of difficulty

Advertising