Kyocera Finecam L4 - Manual (Page 22)

Basic Operations
22
Basic
Op
er
ation
s
Let’s Shoot Movies too
1
Set the Mode to “m” movie mode.
Set the mode select dial to “m”,
then press the POWER button to
turn on the camera power.
2
Compose your picture and bring it into focus.
1 Compose your picture while
watching the LCD monitor.
2 Press the shutter release button
halfway to bring the subject into
focus.
3
Take a picture.
Depress the shutter release button
fully to begin recording.
4 The movie recording ends
automatically after 30 or 120 seconds.
● The zoom button can be used before recording,
but it is disabled during recording.
● To stop recording before 30 seconds have
elapsed, press the shutter release button.
● When [PIXELS] is set to “160x120”, you can
record a max. 120 seconds movie.
UP T E S
DISP.
MENU
Remaining
seconds for
recording
● The camera controls the exposure in record-
ing according to the surrounding brightness.
● Focusing mark (green): Lights when the sub-
ject is brought into focus. (While the mark
flashes the subject isn’t brought into focus
but recording can be performed.)
DISP.
MENU
“Beep”
Remaining seconds are displayed.
(0 to 30 seconds for 320x240 size,
0 to 120 seconds for 160x120 size)
● Focusing mark (red): Lights while the moving
picture is recorded.
DISP.
MENU
00_8CQ.book Page 22 Wednesday, May 14, 2003 8:10 PM