Kyocera Finecam L4 - Manual (Page 90)

Using Setup “SET UP” Mode Functions
90
SET UP
[REC REVIEW] Reviewing the Image Just after
Shooting
You can display the image for a few seconds immediately after shooting.
Operation — setting to [OFF]
1
Turn on the power and set the mode select dial to “SET UP”.
[LANGUAGE] Selecting the Display Language
Operation — setting to [FRANÇAIS]
1
Turn on the power and set the mode select dial to “SET UP”.
[OFF] The image will not be displayed after shooting.
[2SEC] (default) The image is displayed for 2 seconds after shooting.
[4SEC] The image is displayed for 4 seconds after shooting.
2
Press Up or Down on the directional keypad to
select [REC REVIEW], then press Right on the
directional keypad.
[REC REVIEW] menu screen appears.
3
Press Up or Down on the directional keypad to
select [OFF], then press the e button to complete
setting.
[ ] Japanese
[ENGLISH] English
[FRANÇAIS] French
[DEUTSCH] German
[ESPAÑOL] Spanish
[ ] Chinese(simplified)
2
Press Up or Down on the directional keypad to
select [
LANGUAGE], then press Right on the
directional keypad.
[REC REVIEW] menu screen appears.
3
Press Up or Down on the directional keypad to
select [FRANÇAIS], then press the e button to
complete the setting.
SET UP(3/3)
REC_REVIEW 2SEC
4SEC
FILE NO
MODE RESET EXECUTE OFF
SET UP(3/3)
REC REVIEW
FRANÇAIS
ESPAÑOL
ENGLISH
DEUTSCH
FILE NO
MODE RESET
00_8CQ.book Page 90 Wednesday, May 14, 2003 8:10 PM