Kawai CN33 - Manual (Page 34)

Page
34
5
RECORDER
Step 2
Start to play the piano.
The recorder will automatically start recording with the first note played.
During this time, the LED indicators for the REC and PLAY/STOP buttons will be turned on.
Any changes made to the sound while recording will also be recorded.
The recording can be started by pressing the PLAY/STOP button instead of pressing a key, allowing a blank bar
to be inserted at the beginning of a song.
Step 3
Press the PLAY/STOP button to stop recording.
The LED indicators for the PLAY/STOP button and the REC button will turn off and the newly recorded part will
be saved to memory automatically.
Saving may take a few moments and during this time the piano will not respond to any other operations.
To record the piece again, simply repeat the above procedure. The new recording will completely erase the previous
one.
‘ RECORDING A SECOND PART
A second part can be recorded in the second track of the same song. After recording the first part, select the other
track and record the second part.
Step 1
Press and hold the REC button again and press the BASS button to select to record PART2.
The LED indicators for the SONG1 button and PART2 button will start to flash, indicating that they are selected
for recording.
Furthermore, the LED indicator for the PART1 button will now be turned on, indicating that PART1 has already
been recorded.
Hold down the REC button
1 2
Select part 2