Kenwood TK-7180 - Manual (Page 24)

19
S
TORE AND
S
END
Store and send allows you to make DTMF calls without the need for a DTMF keypad.
1 Press the key programmed as Autodial.
• “ ” appears on the display.
2 Press the and keys to select a digit.
• Alternatively, you can enter the digits by using an optional DTMF keypad.
3 Press the C> key to accept the entered digit and move to the next digit.
• Press the A or DTMF # key to delete an incorrect character. Press and hold the A
or DTMF # key to delete all entered characters.
• You can enter up to 30 digits.
4 Press the PTT switch to make the call after the number is entered.
A
UTODIAL
Autodial allows you to store 32 names (up to 12 characters per name) and DTMF
numbers (up to 16 digits per number).
■ S
TORING
DTMF N
UMBERS
1 Press the key programmed as Autodial Programming.
• The first entry in the Autodial list appears on the display.
2 Press the <B and C> keys or the appropriate DTMF key
to select your desired Autodial list number (01 ~ 32).
• If programmed by your dealer, you can also use the and keys.
• “ ” appears on the display after selecting a number.
3 Enter the desired name using the and keys or the optional DTMF
keypad. Select a character, then press the C> key to confirm the
character and move the cursor to the right. Repeat this operation until the
complete name is entered, then press the S key to confirm the entry.
• Press the A or DTMF # key to delete an incorrect character. Press and hold the
A or DTMF # key to delete all entered characters.
• “ ” appears on the display after confirming the entered name.
4 Enter the desired number using the and keys or the optional DTMF
keypad. When using the keypad, simply enter the desired number,
followed by the S key to confirm the entry. When using the and keys,
cycle through the digits to select a digit, then press the C> key to confirm
the digit and move the cursor to the right. Repeat this operation until the
complete number is entered, then press the S key to confirm the entry.
• Press the A or DTMF # key to delete an incorrect character. Press and hold the
A or DTMF # key to delete all entered characters.
• “ ” appears on the display after confirming the entered number.
5 Press the S or DTMF key to store the entered name and number in the
Autodial list.
• Press the A or DTMF # key to cancel the entry.
• If you are overwriting a previous entry, “
” appears on the display.
Press the S or DTMF key to overwrite the entry, or press the A or DTMF #
key to cancel.