Kenwood TK-7180 - Manual (Page 25)

20
■ D
IALING
S
TORED
DTMF N
UMBERS
1 Press the key programmed as Autodial.
• The first entry in the Autodial list appears on the display.
2 Press the and or <B and C> keys or press the appropriate DTMF key
to select your desired Autodial list number (01 ~ 32).
• The stored entry appears on the display.
3 Press the PTT switch to make the call.
■ C
LEARING
S
TORED
DTMF N
UMBERS
1 Press the key programmed as Autodial Programming.
2 Press the and or <B and C> keys, or press the appropriate DTMF
key to select your desired Autodial list number (01 ~ 32).
3 Press the A or DTMF # key.
• “ ” appears on the display after confirming the entered number.
4 Press the S or DTMF key to delete the entry from the Autodial list.
• The selected memory location is cleared.
R
EDIAL
You can redial the last number you transmitted.
Note: To redial a number, you must use an optional microphone with a DTMF keypad.
1 Press the key programmed as Autodial.
• The first entry in the Autodial list appears on the display.
2 Press the DTMF key followed by the DTMF 0 key to display the last called
number.
3 Press the PTT switch to make the call.
Note: Turning OFF the transceiver power clears the redial memory.
C
ONNECT
/ D
ISCONNECT
ID
S
Note: To transmit connect/ disconnect IDs, you must use an optional microphone with a DTMF
keypad.
1 Press the key programmed as Autodial.
• The first entry in the Autodial list appears on the display.
2 Connect ID: Press the DTMF key two times.
Disconnect ID: Press the DTMF key followed by the DTMF # key.
3 Press the PTT switch to make the call.