Konica Minolta Minolta VECTISS100 - Manual (Page 29)

55
DATE/TIME IMPRINTING
54
Changing the Date/Time Format
1. Open the control-panel
door, then press the date
button.
2. Press and hold the select
button until all items in
the date display blink.
3. Turn the control dial to
change the display
format.
4. Press the select button (or the date button) to set
the chosen format.
• Follow the sequence as stated above. If the wrong button is
pressed, the new format will not be entered.
• After changing the date / time format, press the shutter-release
button partway down to return to the standard data-panel
display.
Imprinting the Date or Time
2. Press the date button
until the data panel
displays the format you
want to see on the print.
• After selecting the desired date / time format,
press the shutter-release button partway
down to return to the standard data-panel
display. If imprinting has been selected,
will remain in the data panel.
• The same format will be printed on the front and the back of the
print.
• If no front imprinting is selected, all the date and time
information will be printed on the back of the photograph.
Before taking the picture-
1. Open the control-panel
door.
The sequence is as follows:
Date Time (No Imprinting)