Trouble-shooting – Konica Minolta Minolta VECTISS100 User Manual

Page 42

Advertising
background image

81

TROUBLE-SHOOTING

80

Refer to these pages to determine the cause of a problem
you are experiencing with your camera. If the information
does not cover the problem you are experiencing or the
condition continues, contact your nearest Minolta Service
Facility.

Problem

Cause

Solution

Page

No display appears when
the camera is switched on

Batteries are loaded
incorrectly

Remove and reinstall the batteries.

Camera operation malfunction

Remove and reinstall the batteries.

18

18

Autofocus does not work
when shutter-release
button is pressed partway
down

Situation is unsuitable for
autofocus

Use focus hold or manual focus.

Camera is set to the manual
focus mode

Set to the autofocus mode by pressing the focus
mode button.

31, 56

56

Subject is too close

Check the minimum focus distance for your lens.

Shutter cannot be released

Focus cannot be confirmed

Use focus hold, or manual focus.

Camera is attached to a
microscope or telescope

Contact a Minolta service facility for information.

31, 56

Flash fires when the
shutter-release button is
pressed partway down

The AF illuminator is on

This is a normal camera operation.

63

Flash picture is too dark

Subject is beyond flash range

Make sure the subject is within the flash range.

32

Lower part of flash picture
is dark

Lens hood attached

Remove lens hood.

74

Advertising