Kyocera DuraMax - Manual (Page 125)

Camera 116
Print Pictures From Your Phone
Your phone is PictBridge compatible, allowing you to print directly from your phone without
connecting to a computer. You can also print your pictures using Bluetooth.
Note: Make sure your battery is fully charged before printing your pictures.
To print pictures using a PictBridge-enabled printer:
1. Press > Photos & Videos > My Photos & Videos > In Phone or On Memory Card.
2. Highlight a picture to print and press OPTIONS (right softkey) > Print > PictBridge.
 Press OPTIONS (right softkey) > Select Multiple to select multiple pictures.
3. Connect your phone to the PictBridge-enabled printer using a compatible USB cable.
(Wait until the connection is completed.)
Note: You may not be able to print pictures that you cannot display on your phone.
Note: While you are connected to the printer, your phone‘s screen will display ―Phone Off.‖
You cannot make or receive calls during this time.
4. Set the print settings using your navigation key.
 Type: You can select the print mode from Default Printer, Standard Print, or Index
Print.
 Copies: You can set the number of copies from Single, Doubles, or Manual (up to
ten per picture).
 Size: You can set the print size from Default Printer, 4”x6”, 5”x7”, 8”x10”, or
Letter. (Print sizes may vary according to the type of printer you have.)
 Date: You can imprint the date on your pictures. Select On or Off. (Date stamping
may not be available depending on the type of printer you have.)
5. When you have finished selecting the printer settings, press PRINT (left softkey).
6. When printing is finished, press .
7. Press YES (left softkey). Follow the instructions on the display to unplug the USB cable
from the phone.
To print pictures using a Bluetooth-enabled printer:
1. Press > Tools > Bluetooth > Trusted Devices.
2. Select a printer from the Trusted Devices list and press PRINT … (left softkey) > In
Phone or On Memory Card.