Konexx MOBILE KONNECTOR - Manual (Page 10)

How to Use the Mobile Konnector with
Dial Up Networking in Windows 95/98/NT
Setting up Dial-Up Networking : Windows 95 - Windows 98:
1. Open the My Computer icon (usually located in the upper left corner of desktop).
2. Within the My Computer screen, select the Dial-Up Networking icon.
3. If you already have a Dial-Up connection created, right click on the Dial-Up icon to be changed and select Properties.
If no Dial-Up connection exists or you do not want to change an existing Dial-Up connection, click MAKE NEW
CONNECTION. Name the new connection "KONEXX".
4. Make sure your modem type is displayed, and then click CONFIGURE.
5. Click on the OPTIONS tab.
6. Under "Dial Control" check "Operator assisted or manual dial. Then click OK. If changing an existing Dial-Up connection,
click OK again. Your change has been completed and you are finished with this "setting up" section, please see "Making
Your Connection". If you made a new Dial-Up connection you will return to the Make New Connection screen.
7. Click NEXT. The computer will ask you to enter a phone number. Enter the phone number of the computer (ISP) that you
will be connecting with.
8. Click NEXT, then FINISH. This will return you to the Dial-Up Networking screen. You are now finished with this "setting up"
section. Please see "Dialing out using Dial Up Networking".
Setting up Dial-Up Networking : Windows NT 4.0
1. Open the My Computer icon (usually located in the upper left corner of desktop).
2. Within the My Computer screen, select the Dial-Up Networking icon. This will open up a Phonebook window.
3. Under Phonebook Entry to Dial, select (by clicking once) the phone number of the connection you want to set up for use
with the Mobile Konnector.
4. Click the MORE button. This will bring up a drop-down list of options.
5. Click on Operator assisted or manual dial.
6. Exit the Dial Up Networking and My Computer menus. You are now finished with this "setting up" section. Please see
"Dialing out using Dial Up Networking".
Dialing out using Dial Up Networking:
Once you've created the Dial Up Networking connection in the steps above, you can use it to connect to your network, send
Email, or browse the Web with Mobile Konnector. Follow the steps below to initiate the call:
1. Connect your Mobile Konnector to your phone as described in the connection procedures.
2. Set your Level Switch as described in the Switch Setting section.
3. Make sure you have the phone number you will be calling written down somewhere so you can reference it.
4. Click the icon of your Dial Up Connection that has been configured for use with the Mobile Konnector.
5. A message will appear in Windows saying "You have selected Manual Dial. Lift the receiver and dial the phone number you
would like to connect to. Immediately after the call is answered, click connect and hang up the phone." Follow those
instructions, except do not hang up the phone. Hanging up the phone will terminate the call through the Mobile
Konnector.
Your connection should be established. When you are finished with that session, disconnect the modem as you normally would
and return the handset receiver to the cradle of the telephone.
Receiving data and faxes