Keys Fitness Stepper Machine E2-0 User Manual
Page 14
14
www
.
keys
fitness.com
Assembly
9
J
D
E2
K1
K2
N5
P2
N3
N13
N14
L-(L)
N10
J
J1
D
ASSEMBLY FOR PEDAL JOINT COVER
Step 1:
Install left pedal joint cover (l-l) to conceal pedal arm connection and secure using
screw (N8).
Step 2:
Repeat step 1 on the right side with right pedal joint cover (l-R).
ASSEMBLY FOR CONSOLE
Step 1:
Remove the screws (J1) from the back of the console.
Step 2:
Connect the pulse wires, sensor wires and the toggle wires with the corresponding
wires on the console.
Step 4:
Gently slide the wires down the upright post and secure the console (J) to the upright
post (D) using the screws (J1).
ASSEMBLY FOR WATER BOTTLE HOLDER
Step 1:
Attach the water bottle holder (K2) and secure to the
upright post (D) using 2 screws (N5).
Step 2:
Place water bottle (K1) inside water bottle holder (K2).
Use Tool
6mm
Use Tool
13mm
14mm
ASSEMBLY FOR LEFT ROTATING HANDLEBAR
Attach the left rotating handlebar (E2) to the left rotating handlebar tube (P2) and se-
cure using 4 allen screws (N3), 4 spring washers (N13) and 4 flat washers (N14).