Kambrook KQK600 - Manual (Page 6)


 IMPORTANT: IF yOuR HOT CuP WILL NOT bE uSED FOR
AN ExTENDED PERIOD (E.g. IF yOu ARE ON HOLIDAy), WE
RECOMMEND THAT yOu FIRST EMPTy IT. FOLLOW THE
EMPTyINg yOuR RAPID bOIL ON PAgE 5 bEFORE uSINg THE HOT
CuP AgAIN, CARRy OuT SEVERAL bOIL CyCLES DISCARDINg
THE WATER EACH TIME. THIS SHOuLD PREVENT ANy bAD
SMELL OR TASTE FROM WATER THAT MAy HAVE RESIDED IN
THE uNIT OVER THE ExTENDED PERIOD OF NON uSE.
NOTE: Never operate the Hot Cup dry - too little
water will result in the Hot Cup switching “OFF”. Do
not overfill the Hot Cup - filling above the maximum
mark on the water window may result in water
splashing from the kettle.
NOTE: The Hot Cup must only be used with the
power base supplied.
NOTE: Do not remove the Hot Cup from the power
base during operation. Ensure the Hot Cup has
switched to ‘OFF’ position after the water flow has
ceased before removing the vessel/cup.
 CAuTION: THIS APPLIANCE IS DESIgNED FOR THE bOILINg
OF DRINKINg quALITy WATER ONLy, NEVER uSE IT TO HEAT
OR bOIL ANy OTHER LIquIDS OR FOODSTuFFS. THE LID
SHOuLD ALWAyS bE FIRMLy IN PLACE AND LOCKED CLOSED
bEFORE uSE.
SAFETY BOIL DRY PROTECTION
The Hot Cup is fitted with a safety device, which
protects against overheating should the appliance
be operated with insufficient water. If this occurs
the Hot Cup will stop heating and the illuminated
light on the power on/off switch will go out. Switch
off at the power outlet and allow the kettle to
cool before refilling. Remove the Hot Cup from the
power base and add cold water. Return the Hot
Cup to the power base. The safety device will then
automatically reset.
KQK600_HOTCUP_IB_FA.indd 6 19/6/09 4:00:18 PM