Kambrook KFH540 - Manual (Page 9)

9
NOTE: This heater features a tip-
over switch. If the heater tips
over, it will automatically switch
off. Once placed back into the
upright position, the heater will
automatically switch on again.
Setting the Oscillation
The oscillation function works in all
operating heat and fan modes.
Switch on the SWING
switch
to activate. The heater will begin to
oscillate from side to side.
Switch off the SWING
switch to
stop the heater from oscillating.
ThermoGuard Overheating
Safety Device
Your heater is fitted with a safety
device that switches off the heater
in the event of overheating. Should
this heater stop working, turn off the
heater and inspect the air inlet and
outlet for blockages. Wait at least five
minutes for the protection system to
reset before attempting to restart the
heater.
If the heater fails to operate or the
safety device switches off again,
return the heater to your nearest
Kambrook Service Centre for
examination or repair.
KFH540_IB_FA.indd 9 12/10/09 11:07 AM