Kawasaki ZX-7 78410 - Manual (Page 17)

14
Assembly
• Slide the front axle through the
hole in the shock halves and
handlebar.
13
17
15
• Fit and hold an inner shock half
to the inside of a handlebar.
• Fit and hold an outer shock half
to the outside of the same
handlebar.
• Make sure the top ends of the
shock halves fit into the fender.
• Fit a wheel bushing into the hole
in the center of the front wheel.
• Repeat this procedure to fit the
remaining wheel bushing into the
hole on the other side of the front
wheel.
Inner Shock Half
Fender
Outer Shock Half
Front Axle
Front Wheel
Wheel Bushing