Kawasaki ZX-7 78410 - Manual (Page 25)

2
• Squeeze the tabs on the motor
harness connector to unplug it
from the battery connector.
• Squeeze the tabs on the charger
connector to plug it into the
battery connector
.
• Plug the charger into a standard
120 volt wall outlet .
Note: If power to the outlet is
controlled by a wall switch, make
sure the switch is “ON”.
• Charge the battery a minimum
of 18 hours. Never charge the
battery longer than 30 hours.
Overcharging or undercharging
the battery may shorten battery
life and decrease vehicle running
time.
• Once the battery is charged,
reconnect the battery connector
and motor harness connector
and lower the seat.
Note: Remember to lock the lock
fastener to prevent children from
accessing the batteries.
11 2
11 1
3
Charging the Battery
®
IMPO RTA NT
A 25 AMP FUS E MU ST
BE IN STAL LED I N TO P
OF B ATTE RY B EFO RE
TOY WIL L RE CHA RGE
OR O PER ATE
®
• Rotate the lock fastener on the
seat back 1 /
4
turn using a slotted
screwdriver to unlock the battery
compartment.
• Lift the seat to access the
battery.
• Use pliers to remove the fuse
from the battery.
• Visually examine the fuse to
make sure it is not blown. If the
fuse has blown, replace it with a
new Power Wheels
® 25 amp fuse.
• Reinsert the fuse into the battery
before charging. The battery will
not charge if a 25 amp fuse in
good condition is not inserted
into the battery.
1
GOOD FUSE "BLOWN" FUSE
Motor Harness Connector
Battery Connector
®
Important Note: The battery must be upright while charging. You do not have to
remove the battery from the vehicle to charge it.
11 1
11 2
25
Battery Connector
Charger
Connector