KORG MONOPOLY POLYSIX MS-20 - Manual (Page 11)

Setup
11
Win: Is the connected device driver installed?
Mac: Is the connected device detected in your computer?
Mac: If the device you want to use does not appear in the selection for each port, navi-
gate to the Application folder ➝ Utility ➝ “Audio MIDI Setup,” display the
“MIDI device” tab page, and check whether the connected external MIDI device
has been detected.
Other settings
1 Click the “Other” tab.
A dialog box with settings for operation (Knob Mode) and automatic stopping will
appear.
2 In the Control area, set “Knob Mode” to specify how you want the knobs to oper-
ate.
Circular
Edit values by moving the mouse pointer to the mark indicating a knob’s value,
and dragging to turn the knob. You can also move the knob immediately by
directly clicking the desired position.
Relative Circular
Edit values by dragging as if to turn the knob to the desired position. You will not
be able to move the knob by clicking as with the “Circular” setting above.
Linear
Edit values by dragging the knob upward or downward.
3 In the AutoStop Setting area, specify if and when you want the audio to stop auto-
matically.
The Auto Stop function automatically stops the audio depending on the CPU load
of your computer. (The result is the same as when you execute the “System” menu
command “Stop Audio.”) If you want to use the Auto Stop function, check the
“Enable AutoStop” check box, and use the “AutoStop Rate” slider to specify the
load threshold at which the audio will be stopped. If the CPU load exceeds this
threshold during operation, the audio will stop. If the audio has been stopped
automatically, use the “System” menu command “Play audio” to resume playing.
If audio stops frequently, try lightening the load on the CPU by reducing the
polyphony of the synthesizer(s).
If you don’t use the Auto Stop function, the system will attempt to continue pro-
ducing audio as long as possible. However, depending on the hardware you are
using, you may experience problems such as the mouse becoming unresponsive
when the audio load is high.
4 Click “OK” to finalize the preference settings.
S
etup