Setup, Starting up stand-alone application, Audio settings – KORG MONOPOLY POLYSIX MS-20 User Manual
Page 8
Installation/Setup guide
8
Setup
This chapter explains how to start up the stand-alone application after installation, and
how to make preference settings so you can use it.
Starting up Stand-alone application
1
Use a USB cable to connect the external MIDI device to your computer.
2
Connect the USB-hardware key to your computer.
3
Navigate to the “KORG” folder - “KORG Legacy” folder, and double-click the
software synthesizer icon to start up the program.
Windows
The KORG Legacy folder is in the location you specified when installing the soft-
ware. By default, it will be in the “KORG” folder within the “Program Files”
folder. Alternatively, you can click the [Start] button on the task bar, then “All Pro-
grams,” and start up the program by choosing from “KORG ” folder - “KORG
Legacy” folder.
Mac
Navigate to the “Application” folder - “KORG” folder - “KORG Legacy” folder,
and double-click software synthesizer icon to startup the program.
4
From the System menu, choose “Preference.”
The Preference dialog box “Audio Device” will appear. If “MIDI Setting” appears,
click the “Audio Device” tab.
Note:
The first time you start up the software, or if the preference settings have
been cleared for some reason, or if your computer system has changed, the prefer-
ence dialog box will appear automatically at start-up.
Audio settings
1
In “Driver type” or “Output Device,” select the type of audio driver you want to
use.
Windows
ASIO:
The ASIO driver will be used. ASIO drivers allow minimal latency, and will
give you the best performance. If an ASIO driver is installed, we recommend that
you use this setting.
DirectSound:
DirectSound will be used. Use this setting if an ASIO driver is not
installed in your computer.
MME:
MME (Multi Media Extension) will be used.
Since MME has higher latency than other settings, we recommend that you use
another setting if possible.
Mac
If audio interface is installed in your computer, you will be able to select the driver
for that audio interface.