Kuppersbusch USA IKE339-1 - Manual (Page 5)

Temperature regulation
To operate the appliance, proceed as fol-
lows:
1. Set the required temperature by pressing
the corresponding temperature regula-
tor. The temperature indicator will imme-
diately show the changed setting (DE-
SIRED temperature) and the temperature
indicator flashes.
2. Each time the temperature regulator is
pressed the DESIRED temperature is ad-
justed by 1 °C. The DESIRED tempera-
ture must be reached within 24 hours.
3. Once the required temperature has been
set, after a short period (approx. 5 sec.)
the temperature indicator will show again
the current ACTUAL temperature inside
the corresponding compartment. The
temperature indicator will change from
flashing to continuous illumination.
For a correct storage of the food the following
temperature should be set:
• +5 °C in the fridge
Important! When the setting is changed, the
compressor does not start immediately if
automatic defrosting is currently taking
place. As the storage temperature within the
fridge is reached quickly you can store food
immediately after switching on.
Supercool function
The Supercool function is suited for quick
cooling of large quantities of goods in the re-
frigerator.
To activate the function, do these steps:
1. Press the Supercool button.
2. The Supercool indicator switches on.
The Supercool function now provides for in-
tensive cooling. A DESIRED temperature of
+3°C is automatically selected.
The Supercool function is ended automati-
cally after a period of 6 hours.
You can deactivate the function at any time:
1. Press the Supercool button.
2. The Supercool indicator switches off.
First use
Cleaning the interior
Before using the appliance for the first time,
wash the interior and all internal accessories
with lukewarm water and some neutral soap
so as to remove the typical smell of a brand-
new product, then dry thoroughly. Important! Do not use detergents or abra-
sive powders, as these will damage the fin-
ish.
Daily use
Movable shelves
The walls of the refrigerator are equipped
with a series of runners so that the shelves
can be positioned as desired.
For better use of space, the front half-shelves
can lie over the rear ones.
5