Knoll Systems Front Projector 1080p DLP - Manual (Page 13)

INTRODUCTION
12
Using the Remote Control
Available Range of the Remote Control
„ The remote control can be used to control the
projector within the ranges shown in the
illustration.
When using the remote control:
• Be sure not to drop it, or expose it to moisture
or high temperature.
• The remote control may malfunction under a
fluorescent lamp. If that occurs, move the
projector away from the fluorescent lamp.
Inserting the Batteries
The batteries (two “AAA” size) are included in the package.
Note
• The signal from the remote control can be
reflected by the screen.
1 Press down the tab on the cover
and pull the cover towards the
direction of the arrow.
2 Insert the included batteries.
Insert the batteries making sure the
polarities correctly match the and
marks inside the battery compartment.
3 Insert the lower tab of the cover
into the opening, and press down
the cover until it clicks in place.
45°
30°
23'(7 m)
INPUT 1 INPUT 2 IN PUT 3 IN PUT 4
30°
45°
23'(7 m)
30°
INPU T 1 INPU T 2 INPU T 3 INP UT 4