Pre f ace – Knoll Systems Front Projector 1080p DLP User Manual
Page 4
3
PRE
F
ACE
PRODUCT DISPOSAL
This projector utilizes a tin-lead solder, P-VIP Lamp containing a small amount of mercury. Disposal of
these materials may be regulated due to environmental considerations.
IMPORTANT RECYCLING INSTRUCTIONS
Caution regarding the exhaust of the projector.
Do not place the projector in space that is poorly ventilated or confined. Allow at leat 50 cm clearance
from walls and free air flow around the projector.
Before using the projector, please read this operation manual carefully.
To facilitate reporting the loss or theft of your Projector, record the Serial Number located on the
bottom of the projector and retain this information. Before recycling the packaging, be sure that you
have checked the contents of the carton thoroughly against the list of “Package Contents” on page 7.
WARRANTY
Promptly register the Projector’s Warranty using the REGISTRATION CARD packed with the
projector. The Warranty assures that you immediately receive the full benefit of the parts, service and
labor warranty applicable to your purchase.
SYMBOL EXPLANATIONS
Lamp(s) inside this product contain mercury. This product may contain other elec-
tronic waste that can be hazardous if not disposed of properly. Recycle or dispose in
accordance with local, state, or federal Laws. For more information, contact the Elec-
tronic Industries Alliance at For lamp specific disposal information ch
DISPOSAL:
Do not use household or municipal waste collection services for disposal of electri-
cal and electronic equipment. EU countries require the use of separate recycling
collection services.
Hg
Wall
or
Block
Exhaust Vent