Kobe Range Hoods CH8036SQ - Manual (Page 8)

7
- OPERATING INSTRUCTIONS -
KOBE range hood motors can be operated independently of one another.
This KOBE range hood model is operated by two 2-speed switches located on the front of the
hood. Each switch controls a separate motor with high and low settings. (Fig. 5) The low
setting will handle most exhaust requirements while the high speed should be used for heavier
cooking.
The light switch is located to the right of the control switches and must be turned on to use other
control switches. (Fig. 5) NOTE: Before replacing light bulb, turn off range hood. See section
on Changing the Light Bulb. DO NOT use more than a 20 watt halogen light bulb.
The QuietMode™ feature offers continuous ventilation at a greatly reduced noise level. The
LED indicator switch for the QuietMode™ feature is located to the right of the light switch.
When the QuietMode™ switch is turned on, the LED indicator will be lit and both fans will start
operating on high speeds then slow to QuietMode™ regardless of whether one or both fans are
on. When QuietMode™ is switched off; the previous controls will take effect. Remember to
turn off control switches after you are finished.
If motors start slow then it’s time to change the Quiet Mode™ unit. Call for servicing.
2 speed Left & Right Quiet Mode (LED) Light
Motor Switch Power & light
Switch
{Fig. 5}