KORG DSD MR-1000 - Manual (Page 18)

18
Starting and stopping recording
Each time you record on the MR-1000, a folder is created containing an audio file and a settings
file, collectively called a "project." The folder is named automatically (
→p.45).
You can edit this name after you've finished recording ( →p.24).
Operations on the MR-1000 will handle the entire project folder just as if it were an audio file.
1. To start recording from the record-ready mode, press the play/pause button (the play
LED will light).
The record LED will change from blinking to lit.
2. To pause recording, press the play/pause button (the play LED will blink); to resume re-
cording, press the play/pause button once again (the play LED will light).
A new project is not created if you pause during recording; the recording will still be a
single project.
3. When you're finished recording, press the stop button.
The record LED and play LED will go dark.
Pause and then
resume recording
Project 1 Project 1 Project 2
Start recording Start recording Stop recording
Stop and then
resume recording
Stop recording
Text1_E.p65 06.11.22, 1:22 PM 18