KORG DSD MR-1000 - Manual (Page 28)

28
Setting the date and time
If you set the MR-1000's date and time, the recorded files will have the correct date and time
stamp. Here's how to set the internal clock.
1. Press the menu button, and in the menu list (MENU) screen, use the P-dial to select
and confirm "SYSTEM."
The system setting (SYSTEM) screen will appear.
2. Use the P-dial to select and confirm the date and time indication in the top line.
The date and time setting (Clock) screen will appear.
Push Push
3. Use the P-dial to select and confirm "Year."
The selection icon will change from " " to " ", and the year indication will be highlighted.
4. Turn the P-dial to select the year, and press the P-dial (or the menu button) to confirm.
The selection icon will change from " " to " ".
Push
Push
5. In the same way, use the P-dial to select and confirm the "Month," "Day," "Hour,"
"Minute," and "Sec."
6. When you've finished making settings, press the menu button to return to the system
setting (SYSTEM) screen.
Alternatively, you can return by using the P-dial to select and confirm "<-Back" in the screen.
If you disconnect the AC adaptor or leave the batteries out for about a week, the date and time
settings will be reset, so you will have to install batteries or connect the AC adaptor and make these
settings again. If the date and time have been reset, a message to remind you of this will be dis-
played.
The time will continue to advance while you're setting it.