Kawai CN32 - Manual (Page 16)

Page
16
2
PLA
YING THE
PIANO
Step 4
Press the PIANO2 button three times.
The LED indicator for the PIANO2 button will turn
on.
‘1-3’ will be shown in the LED display, indicating
that the Upper section sound has been changed
to Mellow Grand 2.
Step 5
Press and hold the SPLIT button, then press the HARPSI & MALLETS button twice.
The LED indicator for the HARPSI & MALLETS button
will start to fl ash.
‘2-3’ will be shown in the LED display, indicating
that the Lower section sound has been changed
to Vibraphone.
Step 6
Use the BALANCE slider to adjust the volume balance between the upper and lower sections.
Step 7
Press the SPLIT button to deactivate split mode.
The LED indicator for the SPLIT button will turn off.
„ When SPLIT mode is activated, the Lower Octave Shift function can be used to adjust the octave range for the Lower
section. Please refer to the instructions on page 40 for more information.
„ The infl uence of the damper/sustain pedal over the Lower section can also be turned on and off. Please refer to the
instructions on page 41 for more information.
Lower section Upper section
ON
Press three times
Press and hold the button
1 2
Press twice
ON
ON
ON