Keys Fitness KF-R2.0 - Manual (Page 11)

11
www . keys
fitness.com
G
M3
E2
E3
M2
M1
E
N14
Assembly
5
ASSEMBLY FOR CONSOLE
Step 1:
Connect the sensor wire (e3) and the pulse wire (e2) with
the corresponding wires on the console (G).
Step 2:
Remove 2 screws (N14) from the back of the console (G).
Step 3:
Gently push all wires into the upright post and mount the
console (G) by sliding it onto the console mounting plate
at the top of the upright tube (e). Secure with 2 screws
(N14) to keep the console in place.
ASSEMBLY FOR WATER BOTTLE
Step 1:
Remove 2 screws (M2) from the upright post (e).
Step 2:
Install water bottle holder (M1) on the upright post and
secure it using 2 screws (M2). Place the water bottle (M3)
into the water bottle holder (M1).
Use Tool
6mm