KORG KAOSS PAD Entrancer - Manual (Page 11)

9
12. Sampling and playing
motion video
You can sample a motion video clip and play it back
while using an effect program and the touch-pad to
control the video clip (for example by expanding or
inverting it).
If you have selected a program from the SAMPLE/
PLAY group, you can use the touch-pad to control the
playback speed of the video, or even reverse the
playback.
The sampled video will be lost when you turn off the
power. It is not possible to save the sampled video.
Sampling
1. Select program 94–99 from the “SAMPLE/
PLAY” group.
2. When you press the [REC/STOP] key, the
[REC/STOP] key will light and recording
will begin. Recording will end when you
press the key again or when the memory
capacity has been reached.
If you select an effect clip pattern (40–59) in
pattern display mode, you will be able to
record a pattern. Turn on the [SAMPLE 1] or
[SAMPLE 2] key to record the still image that
you sampled.
Playback
The playback method will depend on the effect
program you have selected.
For a program in the “SAMPLE/PLAY” group
1. Select a program in the “SAMPLE/PLAY”
group.
2. When you touch the touch-pad, the video
clip will play back according to the position
of your finger on the touch-pad.
For a program not in the “SAMPLE/PLAY” group
1. Select a program not in the “SAMPLE/
PLAY” group.
2. With the [SAMPLE 1] and [SAMPLE 2] keys
turned off, hold down the [REC/STOP] key
and touch the touch-pad; the sampled video
clip will playback at normal speed. If you
hold down the [REC/STOP] key and press
the [HOLD] key, the [REC/STOP] key will be
held, allowing you to play back the video
clip simply by touching the touch-pad. Hold
will be cancelled when you press the [REC/
STOP] key once again.
When you hold down the [REC/STOP] key
and press the [HOLD] key, playback will be
held. When you press the [REC/STOP] key
once again, the hold will be cancelled.
Pattern display will be cancelled if you play
back a motion video sample while a pattern
is displayed.
You cannot display a pattern during sample
playback.
13. Sampling and playing a
phrase
If you have recorded a phrase from the input into the
[SAMPLE 1] and [SAMPLE 2] keys, you can select a
program from the “SAMPLE/PLAY” group (90–99)
and use the touch-pad to control the playback speed or
reverse playback.
If you have selected a program from other than the
“SAMPLE/PLAY” group, pressing the [SAMPLE 1] or
[SAMPLE 2] key will play back the phrase that was
recorded on each key. You can record approximately
six seconds of monaural sound in each key.
The recorded phrase will be lost when you turn off
the power. It is not possible to save the recorded
phrase.
Recording
1. Press the [REC/STOP] key. The [REC/STOP]
key LED will blink, and you will be in
record-ready mode.
2. Press either the [SAMPLE 1] or [SAMPLE 2]
key that you want to use for recording. The
playback audio will not be heard at this time.
3. Press the [REC/STOP] key; the [REC/STOP]
key LED will light and recording will begin.
Recording will end when you press the
[REC/STOP] key once again.
Recording will end automatically if you
record up to the maximum recording time.
If you select a program not in the “SAMPLE/
PLAY” group, you can operate the touch-pad
while you record; the sound processed by the
effect will be recorded.
Auto-rec (AUTO REC)
You can make recording start automatically
when audio is input to the [INPUT] audio
jacks.
1. In step 2 of recording, hold down the
[SAMPLE 1] or [SAMPLE 2] key you want to
use, and press the [REC/STOP] key; the
[REC/STOP] key and [SAMPLE 1] [SAMPLE
2] key LEDs will blink simultaneously, and
you will be in record-ready mode.
2. When you input an audio signal, recording will
begin automatically. Recording will end when
you press the [REC/STOP] key once again.
If the lever is set to “COMBI,” and you have
selected a program from the “SAMPLE/PLAY”
group as the video effect, you can record the
video simultaneously with the audio.