KTI Networks KCD-302 Series User Manual
Page 22
-22-
DC2 + and DC2 - can be installed with another power-pair for delivering the
main power input to next converter in a cascading way.
Note: Only up to four device units can be cascaded to receive power
from one main power input source.
DC Power Jack
Connector:
Jack D 6.3mm
D 2.0mm
AC Power Adapters: Optional commercial rated adapters are available
for purchasing.
Rated AC120V/60Hz DC7.5V 1A
Rated AC230V/50Hz DC7.5V 1A
Rated AC100V/50-60Hz DC7.5V 1A
Rated AC240V/50Hz DC7.5V 1A
Steps to apply the power to the device are:
1. Connect power adapter DC plug to the DC power jack of the
converter before connecting to the AC outlet.
2. Connect the power adapter to the AC outlet.
Note: Before you begin the installation, check the AC voltage of your
area. The AC power adapter which is used to supply the DC power
for the unit should have the AC voltage matching the commercial
power voltage in your area.