Kenwood DVF-3070 - Manual (Page 26)

26
DVF-3070 (EN/E,X,Y)
Operations
Various playback functions
Basic play
Preparation
÷ Set the POWER ON/OFF switch to the ON ( ) position.
÷ After the power is switched ON, there is a delay of about
3 seconds before the display is lit.
Load a disc.
1
Start playback.
2
CHAPTER No. (DVD)
TITLE No. (DVD)
TRACK No. (CD/VCD)
Time display
To stop playback
When a Disc Menu appears on the screen
In case of interactive DVDs, a Disc Menu appears on the
screen. Then press ENTER to select specific menu you
want to play by using Cursor keys.
÷ Each press pauses and plays the disc alternately.
RESUME playback (only DVD)
When the
7 (Stop) key has been pressed once during
playback to stop the playback, and then playback is
started again, play will start from the point where the
playback had been stopped. This is called the RE-
SUME function. When the
7 (Stop) key is pressed
again during stop, the RESUME function is cancelled.
Playback of disc
POWER
ON OFF
MAIN UNIT
0
MAIN UNIT REMOTE
6
MAIN UNIT REMOTE
7
6
7
1
Open the tray.
2
Place a disc.
÷ When the 6 key or open/close (0) key is pressed while a
tray is open, the tray closes automatically, and then playback
begins.
When a menu screen is recorded on the DVD disc,
the menu screen will be displayed when the TOP
MENU key or MENU key is pressed. At the menu
screen, the menu can be selected by pressing the
Cursor keys.
Label side
6 (PLAY/PAUSE) key
7 (Stop) key
TOP MENU key
POWER ON/ OFF switch
7 (Stop) key
0 (open/close) key
6 (Play/Pause) key
Disc tray
TOP MENU
Note Note Note
MAIN UNIT
MENU
or
0 or
*5357/26-32/EN 03.5.20, 10:30 AM 26