Kenwood DVF-3070 - Manual (Page 32)

32
DVF-3070 (EN/E,X,Y)
Operations
Various playback functions
Using Bookmarks
The bookmark feature lets you mark a point on the disc
that you can go to quickly. You can store up to 14 book-
marks.
Using IntroScan function
Create the bookmark
1
During playback, press the RANDOM key on the
remote.
3
When you reach the scene you want to mark,
press ENTER key.
RANDOM
MARK
00 00 / 14
GO TO TOTAL
01
Bookmark No.
to be assigned
Bookmark No./
Number of marks
applied for the disk
Number of marks applied
the disk/total number (14
MARK
01 01 / 14
GO TO TOTAL
01
ENTER
Recalling a bookmarked scene
1
During playback, press the RANDOM key on the
remote.
RANDOM
2
Press the Cursor right ( 3) key on the remote to
recalling a bookmark number.
MARK GO TO TOTAL
01 01 03 / 14
Set the cursor to this position.
3
Press the Cursor up/down (
5/∞) key on the re-
mote to select the bookmark number you want
to activate, then press ENTER key.
Notes Notes Notes
÷ If all 14 bookmarks are in use, you can still mark new scenes,
but the previous bookmarks will be erased.
÷ Depending on the disc, the Bookmark function may not
work.
÷ P.B.C. on mode of VCD, the Bookmark function does not
work. ‡
1
During stop mode, press the TOP MENU key on
the remote.
TOP MENU
2
Press the "1" key on the remote to select INTRO,
then press the ENTER key.
÷ The first 10 seconds of each track play.
÷ After Intro Scan goes through all of the tracks, it stops.
÷ When the ENTER key or the TOP MENU key is
pressed during introScan of a track, the unit will return
to normal playback starting with that track.
P.B.C. on mode of VCD, the IntroScan function does not work.
‡
2
Press Cursor up/down (
5/∞) keys on the re-
mote to select desired bookmark number.
÷ Up to 14 bookmarks can be applied in the same way for
one disc.
÷ When the ENTER key is pressed at a previously marked
bookmark, that mark will be changed to the new point.
CD IntroScan playback
1
During stop mode, press the TOP MENU key on
the remote.
TOP MENU
2
Select 1 (INTRO), 2 (DISC), or 3 (TRACK) with the
numeric keys of the remote control and press
the ENTER key.
VCD IntroScan playback
It is possible to play back approx. 10 seconds of the
beginning of each track.
IntroScan ends when 2 (EXIT) is selected.
The VCD IntroScan function has three modes.
1. INTRO : The first approx. 8 seconds of each track will
be played one after another .
2. DISC : The beginning of each of the first nine
tracks of the disc will be played back se-
quentially and displayed on the screen.
When SKIP key is pressed, the next nine
screens will be played back and displayed.
3. TRACK: The selected track will be played back
with the screen display divided into
nine parts.
The next nine pictures (nine tracks) will be displayed when
the skip up (
¢) key is pressed.
When the number of one of the pictures is selected with
the numeric keys, playback will start from that picture.
At the time of "DISC" or
"TRACK" , the screen
will be displayed divided
into nine pictures.
*5357/26-32/EN 03.5.20, 10:30 AM 32