Kompernass KH 2370 User Manual
Page 17
16
KH 2370
17
KH 2370
television, then check this by referring to the operating
instructions of your television.
NORMAL/PS
Picture format 4:3 Pan & Scan; when playing films with for-
mat 16:9, the left and right part of the picture are cut off.
This means that the height of the screen is utilized as far as
possible.
NORMAL/LB
Picture format 4:3; when playing films with format 16:9,
black bars can be seen on the upper and lower part of the
picture.
WIDE
Wide screen format16:9; when playing films with format
16:9 with 16:9 (1.78:1) wide screen televisions, the picture
appears without black bars on the upper and lower parts
of the picture and without the right and left part of the
picture being cut off.
3
Return to the list of the subitems.
Setting the language of the OSD menus
1
Select the subitem OSD LANG using the control buttons.
Here you can set the language in which the OSD menu
is displayed.
GENERAL PAGE
TV Display
OSD Lang
English
Scr Saver
French
German
Italian
Portuguese
Spanish
Main page
2
Select the requested language in the list of options us-
ing the control buttons.
3
Return to the list of subitems.
Switch on the screensaver
1
Select the subitem SCR SAVER using the control buttons.
Info:
The screensaver prevents a picture, which has been dis-
played for a long time, from being burned into the tel-
evision screen. If the screensaver is switched on, this will
automatically be shown as soon as
• the OSD menu is displayed for a longer period of
time on the television screen and
• at the same time no buttons are pressed on the re-
mote control/on the front of the combination unit.
2
Select between ON and OFF in the list of options using
the control buttons.
3
Return to the list of subitems. Select the subitem MAIN
PAGE using the control buttons, to return to the main
menu.
Loudspeaker settings
The subsequent settings apply to the sound reproduc-
tion by means of the surround loudspeakers and the sub-
woofer of the combination unit. If you would like to use
an external audio component for the sound reproduction
then you have to carry out the settings on this component.
Check the operating instructions to find out how to carry
out these settings on the audio component.
In order to get an optimal sound, it is necessary to adjust
the sound reproduction to
• the conditions at the installation location of the combi-
nation unit and
• your personal preferences
To do this:
1
Select the menu item SPEAKER SETUP in the main
menu. In the menu SPEAKER SETUP, the following is
displayed:
SPEAKER SETUP
Downmix
Stereo
Center
OFF
Rear
Subwoofer
Cntr Delay
Rear Delay
Test Tone
2
Select the subitems in the list one after the other:
DOWNMIX
Select the option STEREO, if you
• have connected the combination unit to a stereo tel-
evision and
• would not like to use the surround loudspeakers for
the sound reproduction or