Kenwood KRC-765 - Manual (Page 10)

Entering the frequency and tuning.
1 Select the band
Press the [FM] or [AM] button.
2 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote.
"– – – –" is displayed.
3 Enter the frequency
Press the number buttons on the remote.
Example:
Desired frequency Press button
92.1 MHz (FM) [#0], [#9], [#2], [#1]
810 kHz (AM) [#0], [#8], [#1], [#0]
Canceling Direct Access Tuning
Press the [DIRECT] button on the remote.
Direct Access Tuning (Function of remote)
Selecting the station.
1 Select tuner source
Press the [SRC] button.
Select the "TUNER" display.
2 Select the band
Press the [FM] or [AM] button.
Each time the [FM] button is pressed it switches between the
FM1, FM2, and FM3 bands.
3 Tune up or down band
Press the [
4] or [¢] button.
During reception of stereo stations the "ST" indicator is ON.
Tuning
Function of the KRC-665R
Tuner features
— 10 —
English
LOUD
DAB
SCAN B.S./RDM REP MTL/M.RDM DISP
OFF
TI TI NAME B NR
SRC
4 ¢ AM # 1-6
FM MENU
ST indicator
Band display
Frequency display Preset station number
KRC-765_U.S_r3 03.2.21 4:40 PM Page 10