Kenwood KRC-765 - Manual (Page 7)

Press the [DISP] button.
Each time the button is pressed the display switches as shown
below.
In Tuner source
Information Display
Frequency (KRC-765/KRC-665)
Station name (KRC-765/KRC-665)
"SNPS"
Program Service name or Frequency
(KRC-665R)
Radio text (KRC-665R) "R-TEXT"
Clock
Displaying the frequency during Program Service name
reception (KRC-665R only)
Press the [DISP] button for at least 1 second.
The frequency for the RDS station will be displayed for 5
seconds instead of the Program Service name.
In Tape source
Information
Play side
Tape running
Clock
In External disc source
Information Display
Track number (KRC-765)
Track number & Track Time
(KRC-665/665R)
Disc name
"DNPS"
Disc title "D-TITLE"
Track title "T-TITLE"
Track number & Track Time (KRC-765)
Clock
Switching the information displayed.
Switching Display
Fine-tuning so that the System Q value is optimal when setting
the speaker type.
1 Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2 Enter Speaker Setting mode
Press the [Q] button.
3 Select the Speaker type
Press the [
4] or [¢] button.
Each time the button is pressed the setting switches as shown
below.
Speaker type Display
OFF "SP OFF"
For 5 & 4 in. speaker "SP 5/4"
For 6 & 6x9 in. speaker "SP 6*9/6"
For the OEM speaker "SP OEM"
4 Exit Speaker Setting mode
Press the [Q] button.
Speaker Setting
Volume offset: Each source's volume can be set as a difference
from the basic volume.
5 Exit Audio Control mode
Press the [AUD] button.
— 7 —
KRC-765_U.S_r3 03.2.21 4:39 PM Page 7