Kenwood KRC-765 - Manual (Page 34)

English
— 34 — — 34 —
Connecting Wires to Terminals (KRC-665R)
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
TEL MUTE
P.CONT
ANT.CONT
Rear right
output (Red)
4
10
Rear left
output (White)
Front left output
(White)
12
Front right
output (Red)
5 Connector Function Guide
Pin Numbers for
ISO Connectors
Cable Color Functions
External Power
Connector
A–4
A–5
A–7
A–8
Speaker
Connector
B–1
B–2
B–3
B–4
B–5
B–6
B–7
B–8
Yellow
Blue/White
Red
Black
Purple
Purple/Black
Gray
Gray/Black
White
White/Black
Green
Green/Black
Battery
Power Control
Ignition (ACC)
Earth (Ground)
Connection
Rear Right (+)
Rear Right (–)
Front Right (+)
Front Right (–)
Front Left (+)
Front Left (–)
Rear Left (+)
Rear Left (–)
Battery wire (Yellow) 6
Ignition wire (Red) 7
FM/AM antenna
input
3
Antenna Cord (ISO) 1
Antenna Conversion Adaptor (ISO–JASO) (Accessory6) 2
Wiring harness
(Accessory1)
16
If no connections are
made, do not let the wire
come out from the tab.
18
Power control/ Motor
antenna control wire
(Blue/White)
20
17
TEL mute wire (Brown)
Connect either to the power
control terminal when using
the optional power amplifier,
or to the antenna control
terminal in the vehicle.
23
Connect to the terminal that is
grounded when either the
telephone rings or during
conversation.
21
A–7 Pin (Red) 8
A–4 Pin (Yellow) 9
Connector A
Connector B
Fuse (10A) 13
To KENWOOD disc changer/
DAB control input/
KPA-SD100/KPA-HD100/KPA-SS100
16
To connect these leads, refer
to the relevant instruction
manuals.
17
KRC-765_U.S_r3 03.2.21 4:41 PM Page 34