Kodak PDV-70X - Manual (Page 15)

Playing Video CDs
9
Searching to a Location
You can search to a track or time on the current disc using the SEARCH button.
To search to a location:
1. Press SEARCH to bring up the Search menu.
2. Use and to select track or time.
3. Enter the desired location.
4. Press .
Repeating Tracks
Press REPEAT to cycle through the repeat modes: Off, Repeat One, and Repeat
All. You can repeat an arbitrary section of video using the A-B RPT button.
Note: To repeat tracks on a Video CD, playback control must be off. Press PBC
to turn playback control on and off.
To repeat an arbitrary selection:
1. Press A-B RPT once. “REPEAT A–” shows to mark the beginning of the
section.
2. Press A-B RPT once more to mark the end of the section. “REPEAT A–B”
will display on the screen.
The section will begin repeating and will continue until you press A-B RPT
again.
Programming Playback Sequence
The PROGRAM button brings up the Program menu, which allows you to
program playback sequence. There are 16 slots available.
To program playback sequence:
1. Press PROGRAM to bring up
the Program menu.
2. Select the first slot using the
arrow controls, and enter
the desired track number
using the keypad.
3. Proceed in the same manner
through the next slots until
the whole sequence is
programmed.
4. Select “PLAY” using the arrow controls and then press to begin playing
back the sequence.
Select “CLEAR” and press to clear the playback sequence and start over.
P
1
2
3
4
RO
[
[
[
[
G
–
–
–
–
–
–
–
–
]
]
]
]
5
6
7
8
P L
[
[
[
[
A
–
–
–
–
Y
–
–
–
–
]
]
]
]
1
1
1
C
9
0
1
2
L E
[
[
[
[
A
–
–
–
–
R
–
–
–
–
]
]
]
]
1
1
1
1
3
4
5
6
[
[
[
[
–
–
–
–
–
–
–
–
]
]
]
]
OMPDV70X.book Page 9 Sunday, May 28, 2006 8:45 PM