Kenwood DPX-6020 - Manual (Page 39)

— 39 —
Installation ■
Installation (for TOYOTA, NISSAN Car etc.)
When performing a check of the CD operation prior to installation,
place this unit in a hirizontal position and perform a loading/eject of
the CD.
2CAUTION
Install onto the car bracket using the supplied screws (M5 × 6 mm,
M5 x 7 mm). The holes of the car bracket to use will differ
depending on the car model.
When a ground wire is
included in the wiring kit
(which is sold separately),
fasten the ground wire
with the binding screw
located on the rear panel
of this unit.
Accessory2
(M4 × 8 mm)
Accessory1
(M5 × 6 mm)
or Accessory0
(M5 × 7 mm)
Accessory3
(Only for NISSAN car)
DPX-6020_K_U.S 01.12.25 1:57 PM Page 39