Kenwood DV-603 - Manual (Page 11)

11
Preparations
DV-603/DVF-3060/DVF-3060K (EN/K,P,E,T,M,X,Y)
System Connections
Caution:
Do not plug in the power lead until all connections are com-
pleted.
Make connections as shown below.
When connecting the related system components, re-
fer also to the instruction manuals of the related com-
ponents.
Be sure to adhere to the following, or proper ventilation will be blocked causing damage or fire hazard.
÷ Do not place any objects impairing heat radiation onto the top of the unit.
÷ Leave some space around the unit (from the largest outside dimension including projection) equal to or greater than, shown below.
Top panel : 50 cm Side pannel : 10 cm Back panel : 10 cm
Malfunction of microcomputer
Caution
If operation is not possible or erroneous display appears even though
all connections have been made properly, reset the microcomputer
referring to "In case of difficulty".
y
Connecting to a TV with video (composite) input terminal
Connecting to a TV with S-video input terminal
Audio cord
S-video cord
TV
TV
Audio video cord Audio video cord
TV
(For Europe and U.K.) (For other countries)
S-video cord
TV
Audio cord
(For Europe and U.K.) (For other countries)
Connecting to a TV with SCART input terminal
(For Europe and U.K.)
TV
SCART cable