Kenwood DV-603 - Manual (Page 14)

14
Preparations
DV-603/DVF-3060/DVF-3060K (EN/K,P,E,T,M,X,Y)
The keys on the remote control unit with the same names as on the main
unit have the same function as the keys on the main unit.
1
Numeric keys )
2
CLEAR key (
3
SUBTITLE key ¡
(SUBTITLE) ON/OFF key
¡
4
Cursor Up (
5), Down (∞),
Left (
2) and Right (3) keys
(,•
5
P.MODE key §
RANDOM key ∞
6
SLOW (Back slow/
Forward slow) keys
&
STEP (Back step/
Forward step) keys
&
7 1 key/¡ key (Search
key)
&
4 (PREV.) key/¢
(NEXT) key (Skip key)
&
8
REPEAT key ¢
A-B Repeat key ¢
Model : RC-D0307 (Infrared ray system)
Operation of remote control unit
9
DIMMER key #
0
MENU key •
!
ON SCREEN key (
@
TOP MENU key ^,‡
#
AUDIO key ¡,‡
$
ANGLE key ™
%
RETURN key •
ENTER key (
^ 7 (Stop) key ^
6 (Play/Pause) key ^
1 2 3
4 5 6
7 8 9
0 CLEAR
ON/OFF SUBTITLE
P.MODE RANDOM
MULTI CONTROL
RETURN ENTER
REPEAT
DIMMER
A-B 7 6
MENU
ON SCREEN
TOP MENU
AUDIO
ANGLE
STEP SLOW
1 ¡ 4 ¢
1
4
9
6
7
8
5
2
3
0
!
@
#
$
%
^
DV-603/ DVF-3060
Loading batteries
3 Close the cover.
÷ Insert two R6/LR6 (“AA”-size) batteries
following the polarity indications.
Operation
Operating range
(approx.)
Remote
sensor
1. The provided batteries are intended for use in operation checking, and their service life may be short.
2. When the remote controllable distance becomes short, replace both of the batteries with new ones.
3. If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote sensor,
malfunction may occur. In such a case, change the installation position to avoid malfunction.
Notes Notes
6m
1 Remove the cover. 2 Insert batteries.
÷ When pressing more than one remote control keys succes-
sively, press the keys securely by leaving an interval of 1 sec-
ond or more between pressing of keys.
Insert the power plug into a power outlet, press the
POWER ON / OFF switch of the main unit to ON, then
press the desired remote control key.